| PROPERTIES |
VALUES |
UNITS |
TEST CONDITIONS |
| Resistance to Traction |
460 |
Mpa |
ASTM D 3039-76 |
| Extension to Rupture |
3 |
% |
ASTM D 3039-76 |
| Traction Modulus |
15 |
Gpa |
ASTM D 3039-76 |
| Resistance to Bending |
650 |
Mpa |
ASTM D 790-90 |
| Bending Modulus |
27 |
Gpa |
ASTM D 790-90 |
| ILSS (Interlaminar Shear Strength) |
50 |
Mpa |
ASTM D 2344-84 |
| Specific Weight |
1.35 to 1.39 |
|
|
| Compressive Strength |
56,893 - 40 |
psi - Kg/mm2 |
|
| Maximum Serviceable Temperature
- Resin* |
446 - 230* |
°F - °C |
|
| Maximum Serviceable Temperature
- Woven Fibers |
1112 - 600 |
°F - °C |
|
*The Shim use is not affected by the possible disappearance of the resin, under the heat action.
| The material complies as follows with the ABD 0031 official standard : |
| |
- classified A (ex ATS 1 000-001),
- FAR 25.853 for smoke density and toxicity.
|
| According to the NF F 16-101 official standard, the product is classified : |
|
- M1 for behavior in fire,
- F1 for smoke density and toxicity.
|
| According to the NF P 85-501 official standard, the product is classified : |
|
|
| The product also meets the characteristic requirements of the D6-51377 official
standard as follows : |
|
- for behavior in fire,
- for low smoke emission and low heat emission.
|
| SPECIFIC WEIGHT |
THICKNESSES OF LAMINATIONS |
| 0,050 |
0,076 |
0,100 |
| |
|
| 1,35 |
x |
|
|
| 1,37 |
|
x |
|
| 1,39 |
|
|
x |
| SPECIFIC WEIGHT |
THICKNESSES OF LAMINATIONS |
| .002 |
.003 |
.004 |
| |
|
| 1.35 |
x |
|
|
| 1.37 |
|
x |
|
| 1.39 |
|
|
x |
For more information : tech.support@lamecogroup.com
<< Previous
|
